How to fix an Xbox One controller headphone jack

Experiencing troubles with your Xbox Ane controller'south 3.5mm headphone jack? It's an affordable and easy fix, but requiring the know-how to become under the hood and swap out the essentials. Get dorsum to gaming and chatting fast with this 10-minute fix for your Xbox gamepad.

Products used in this guide

Get your set up: Xbox One Replacement Headphone Jack ($6 at Amazon)
Trusty opening tools: Xbox 1 Controller Tool Ready ($viii at Amazon)

How to supplant Xbox controller 3.5mm headphone jack

When encountering issues with your Xbox Ane controller's 3.5mm headphone jack, a full replacement of the jack is an easy set. Xbox controller sound jacks aren't but cheap; installing them takes minutes with components in-hand. Using the right tools and expertise, swapping it out tin mean huge savings over a full controller replacement.

These steps follow the process on Microsoft's latest third-generation controller design. Go on in mind that performing modifications on Xbox 1 controllers tin void whatever warranties.

Insert the pry tool between the controller grip and faceplate, starting near the trigger.
Follow the outer seam with the pry tool, breaking the grip panel away until detached.
Repeat to remove the second grip panel.
Remove the controller battery door.
Remove batteries from the controller.
Suspension the sticker within the battery compartment to expose a screw.
Remove all 5 rear screws using a T8 Security Torx screwdriver.
Elevator the front faceplate from the controller housing.
Remove the rear controller vanquish.
Remove the two rear screws above the vibration motors, using a T6 Torx screwdriver.
Separate the rear lath from the acme board. Work the boards apart from the middle, disconnecting the 14-pin connector.
Nudge the headphone jack until information technology falls from between the boards.
Insert the new headphone jack. Ensure the port is correctly oriented and seated, with connectors facing the rear board.
Press the two boards together, ensuring the 14-pin connector is reconnected. The new headphone port should now sit firmly in the controller.
Spiral dorsum in the two rear screws using a T6 Torx screwdriver
Lay the controller internals back into the rear shell.
Re-attach the controller faceplate.
Screw back in all 5 screws using a T8 Security Torx screwdriver.
Re-attach the two controller grip panels.
Re-attach the battery door.

Later completing the headphone jack repair process, existing iii.5mm headphones should function through the port.

If yous're unable to hear sound via headphones, we recommend re-opening the controller to ensure the jack is correctly seated and its connectors align with the controller lath. Also, ensure the two controller boards are connected via the 14-pin connector, creating that snug fit to concord the jack in position.

Our summit equipment picks

Fixing your Xbox One headphone jack is a cakewalk, with replacements up for grabs at just a few dollars. While it's non a Microsoft-certified set up, it saves a ton on an all-new wireless controller.

Fix it up

Xbox 1 Replacement Headphone Jack

Wired up and ready for action

Claw yourself upward with a replacement iii.5mm headphone jack for your Xbox One controller. This third-political party component packs identical features for clay cheap.

With the Xbox One controller'south internals locked behind pesky clips and screws, this meaty tool kit wraps all you need into one package.

Handy tools

Xbox I Controller Tool Set

Put the power in your hands

This three-slice toolset is ideal for Xbox 1 modifications, bundling a T8 Security Torx screwdriver, T6 Torx screwdriver, and plastic pry tool. It'southward all you need to go under the hood with your Xbox controllers.

We may earn a committee for purchases using our links. Learn more.